Cell wall Totally Explained

Everything about Cell Wall totally explained

A cell wall is a fairly rigid layer surrounding a cell, located external to the cell membrane, which provides the cell with structural support, protection, and acts as a filtering mechanism. The cell wall also prevents over-expansion when water enters the cell. They are found in plants, bacteria, archaea, fungi, and algae. Animals and most protists don't have cell walls.
The materials in a cell wall varies between species. In plants, the strongest component of the complex cell wall is a carbohydrate polymer called cellulose. In bacteria, peptidoglycan forms the cell wall. Archaea have various chemical compositions, including glycoprotein S-layers, pseudopeptidoglycan, or polysaccharides. Fungi possess cell walls of chitin, and algae typically possess walls constructed of glycoproteins and polysaccharides, however certain algal species may have a cell wall composed of silicic acid. Often, other accessory molecules are found anchored to the cell wall.

Properties

The cell wall serves a similar purpose in those organisms that possess them. The wall gives cells rigidity and strength, offering protection against mechanical stress. In multicellular organisms, it permits the organism to build and hold its shape (morphogenesis). The cell wall also limits the entry of large molecules that may be toxic to the cell. It further permits the creation of a stable osmotic environment by preventing osmotic lysis and helping to retain water. The composition, properties, and form of the cell wall may change during the cell cycle and depend on growth conditions.

Rigidity

In most cells, the cell wall is semi-rigid, meaning that it'll bend somewhat rather than holding a fixed shape. This flexibility is seen when plants wilt, so that the stems and leaves begin to droop, or in seaweeds that bend in water currents. Wall rigidity seen in healthy plants results from a combination of the wall construction and turgor pressure. As John Howland states it:
passive uptake of water.
Other cell walls are inflexible. In plants, a secondary cell wall is a thicker additional layer of cellulose. Additional layers may be formed containing lignin in xylem cell walls, or containing suberin in cork cell walls. These compounds are rigid and waterproof, making the secondary wall stiff. Both wood and bark cells of trees have secondary walls. Other parts of plants such as the leaf stalk may acquire similar reinforcement to resist the strain of physical forces.
Certain single-cell protists and algae also produce a rigid wall. Diatoms build a frustule from silica extracted from the surrounding water; radiolarians also produce a test from minerals. Many green algae, such as the Dasycladales encase their cells in a secreted skeleton of calcium carbonate. In each case, the wall is rigid and essentially inorganic.

Permeability

The primary cell wall of most plant cells is semi-permeable and permit the passage of small molecules and small proteins, with size exclusion estimated to be 30-60 kDa. Key nutrients, especially water and carbon dioxide, are distributed throughout the plant from cell wall to cell wall in apoplastic flow.

Plant cell walls

Composition

   The major carbohydrates making up the primary (growing) cell wall are cellulose, hemicellulose and pectin. The cellulose microfibrils are linked via hemicellulosic tethers to form the cellulose-hemicellulose network, which is embedded in the pectin matrix. The most common hemicellulose in the primary cell wall is xyloglucan. In grass cell walls, xyloglucan and pectin are reduced in abundance and partially replaced by glucuronarabinoxylan, a hemicellulose. Primary cell walls characteristically extend (grow) by a mechanism called acid growth, which involves turgor-driven movement of the strong cellulose microfibrils within the weaker hemicellulose/pectin matrix, catalyzed by expansin proteins.
   The major polymers that make up wood (largely secondary cell walls) include cellulose (35 to 50%), xylan, a type of hemicellulose, (20 to 35%) and a complex phenolic polymer called lignin (10 to 25%). Lignin penetrates the spaces in the cell wall between cellulose, hemicellulose and pectin components, driving out water and strengthening the wall. Secondary walls - especially in grasses - may also contain microscopic silicate crystals, which may strengthen the wall and protect it from herbivores.
   Plant cells walls also contain numerous enzymes, such as hydrolases, esterases, peroxidases, and transglycosylases, that cut, trim and cross link wall polymers. Small amounts (1-5%) of structural proteins are found in most plant cell walls; they're classified as hydroxyproline-rich glycoproteins (HRGP), arabinogalactan proteins (AGP), glycine-rich proteins (GRPs), and proline-rich proteins (PRPs). Each class of glycoprotein is defined by a characteristic, highly repetitive protein sequence. Most are glycosylated, contain hydroxyproline (Hyp) and become cross-linked in the cell wall. These proteins are often concentrated in specialized cells and in cell corners. Cell walls of the epidermis and endodermis may also contain suberin or cutin, two polyester-like polymers that protect the cell from herbivores. The relative composition of carbohydrates, secondary compounds and protein varies between plants and between the cell type and age.
   Up to three strata or layers may be found in plant cell walls:

The middle lamella, a layer rich in pectins. This outermost layer forming the interface between adjacent plant cells and glues them together.
The primary cell wall, generally a thin, flexible and extensible layer formed while the cell is growing.
The secondary cell wall, a thick layer formed inside the primary cell wall after the cell is fully grown. It isn't found in all cell types. In some cells, such as found xylem, the secondary wall contains lignin, which strengthens and waterpoofs the wall.

Cell walls in some plant tissues also function as storage depots for carbohydrates that can be broken down and resorbed to supply the metabolic and growth needs of the plant. For example, endosperm cell walls in the seeds of cereal grasses, nasturtium, and other species, are rich in glucans and other polysaccharides that are readily digested by enzymes during seed germination to form simple sugars that nourish the growing embryo. Cellulose microfibrils are not readily digested by plants, however.

Formation

The middle lamella is laid down first, formed from the cell plate during cytokinesis, and the primary cell wall is then deposited inside the middle lamella. The actual structure of the cell wall isn't clearly defined and several models exist - the covalently linked cross model, the tether model, the diffuse layer model and the stratified layer model. However, the primary cell wall, can be defined as composed of cellulose microfibrils aligned at all angles. Microfibrils are held together by hydrogen bonds to provide a high tensile strength. The cells are held together and share the gelatinous membrane called the middle lamella, which contains magnesium and calcium pectates (salts of pectic acid). Cells interact though plasmodesma(ta), which are inter-connecting channels of cytoplasm that connect to the protoplasts of adjacent cells across the cell wall.
In some plants and cell types, after a maximum size or point in development has been reached, a secondary wall is constructed between the plant cell and primary wall. Unlike the primary wall, the microfibrils are aligned mostly in the same direction, and with each additional layer the orientation changes slightly. Cells with secondary cell walls are rigid. Cell to cell communication is possible through pits in the secondary cell wall that allow plasmodesma to connect cells through the secondary cell walls. Trees modify cell walls in their branches to reinforce and support structure. Conifers, such as pine, produce thicker cell walls on the undersides of branches to push their branches upwards. The resulting wood is called compression wood. By contrast, hardwood trees reinforce the walls on the upper sides of branches to pull their branches up. This is known as tension wood. Additional thickening may occur in other parts of the plant in response to mechanical stress.

Algal cell walls

Like plants, algae have cell walls. Algal cell walls contain cellulose and a variety of glycoproteins. The inclusion of additional polysaccharides in algal cells walls is used as a feature for algal taxonomy.

Manosyl form microfibrils in the cell walls of a number of marine green algae including those from the genera, Codium, Dasycladus, and Acetabularia as well as in the walls of some red algae, like Porphyra and Bangia.

Xylanes

Alginic acid is a common polysaccharide in the cell walls of brown algae

Sulfonated polysaccharides occur in the cell walls of most algae; those common in red algae include agarose, carrageenan, porphyran, furcelleran and funoran. Other compounds that may accumulate in algal cell walls include sporopollenin and calcium ions.
The group of algae known as the diatoms synthesize their cell walls (also known as frustules or valves) from silicic acid (specifically orthosilicic acid, H₄SiO₄). The acid is polymerised intra-cellularly, then the wall is extruded to protect the cell. Significantly, relative to the organic cell walls produced by other groups, silica frustules require less energy to synthesize (approximately 8%), potentially a major saving on the overall cell energy budget and possibly an explanation for higher growth rates in diatoms.

Fungal cell walls

There are several groups of organisms that may be called "fungi". Some of these groups have been transferred out of the Kingdom Fungi, in part because of fundamental biochemical differences in the composition of the cell wall. Most true fungi have a cell wall consisting largely of chitin and other polysaccharides. True fungi don't have cellulose in their cell walls, but some fungus-like organisms do.

True fungi

Not all species of fungi have cell walls but in those that do, the plasma membrane is followed by three layers of cell wall material. From inside out these are:

a chitin layer (polymer consisting mainly of unbranched chains of N-acetyl-D-glucosamine)

a layer of β-1,3-glucan

a layer of mannoproteins (mannose-containing glycoproteins) which are heavily glycosylated at the outside of the cell.

Fungus-like protists

The group Oomycetes, also known as water molds, are saprotrophic plant pathogens like fungi. Until recently they were widely believed to be fungi, but structural and molecular evidence has led to their reclassification as heterokonts, related to autotrophic brown algae and diatoms. Unlike fungi, oomycetes typically possess cell walls of cellulose and glucans rather than chitin, although some genera (such as Achlya and Saprolegnia) do have chitin in their walls. The fraction of cellulose in the walls is no more than 4 to 20%, far less than the fraction comprised by glucans. The spore wall has been shown to possess three layers, the middle of which is composed primarily of cellulose, and the innermost is sensitive to cellulase and pronase. Bacterial cell walls are different from the cell walls of plants and fungi which are made of cellulose and chitin, respectively. The cell wall of bacteria is also distinct from that of Archaea, which don't contain peptidoglycan. The cell wall is essential to the survival of many bacteria. The antibiotic penicillin is able to kill bacteria by inhibiting a step in the synthesis of peptidoglycan.
Gram-positive bacteria possess a thick cell wall containing many layers of peptidoglycan and teichoic acids. In contrast, Gram-negative bacteria have a relatively thin cell wall consisting of a few layers of peptidoglycan surrounded by a second lipid membrane containing lipopolysaccharides and lipoproteins. Most bacteria have the Gram-negative cell wall and only the Firmicutes and Actinobacteria (previously known as the low G+C and high G+C Gram-positive bacteria, respectively) have the alternative Gram-positive arrangement. These differences in structure can produce differences in antibiotic susceptibility, for instance vancomycin can kill only Gram-positive bacteria and is ineffective against Gram-negative pathogens, such as Haemophilus influenzae or Pseudomonas aeruginosa.

Archaeal cell walls

Although not truly unique, the cell walls of Archaea are unusual. Whereas peptidoglycan is a standard component of all bacterial cell walls, all archaeal cell walls lack peptidoglycan, with the exception of one group of methanogens. While the overall structure of archaeal pseudopeptidoglycan superficially resembles that of bacterial peptidoglycan, there are a number of significant chemical differences. Like the peptidoglycan found in bacterial cell walls, pseudopeptidoglycan consists of polymer chains of glycan cross-linked by short peptide connections. However, unlike peptidoglycan, the sugar N-acetylmuramic acid is replaced by N-acetyltalosaminuronic acid, known as an S-layer. S-layers are common in bacteria, where they serve as either the sole cell-wall component or an outer layer in conjunction with peptidoglycan and murein. Most Archaea are Gram-negative, though at least one Gram-positive member is known.Further Information

Get more info on 'Cell Wall'.

External Link Exchanges

Do you know how hard it is to get a link from a large encyclopaedia? Well we're different and will prove it. To get a link from us just add the following HTML to your site on a relevant page:

<a href="http://cell_wall.totallyexplained.com">Cell wall Totally Explained</a>

Then simply click through this link from your web page. Our crawlers will verify your link, extract the title of your web page and instantly add a link back to it. If you like you can remove the words Totally Explained and embed the link in article text.
As long as your link remains in place, we'll keep our link to you right here. Please play fair - our crawlers are watching. Your site must be closely related to this one's topic. Any kind of spamming, dubious practises or removing the link will result in your link from us being dropped and, potentially, your whole site being banned.